Secrets on the Grill

bbq, grills, grilled, smoker, marinade, chicken salad, pork recipes, grilling, barbeque, barbecue, barbecue sauce, steak recipes, charcoal grill, grill parts, charcoal grilling, outdoor stove, superkalan, charcoal fuel, briquettes, briquetting, charcoal briquettes, pork chop recipes, char grill, tilapia, grilled fish, outdoor grill, grilling tools, hibachi grill, charcoal smokers, how to grill, green fuel, homemade briquettes, briquetting machines, biomass fuel, briquette fuel, outdoor cooker

Monday, March 22, 2010

Briquette Making - Mold

The mold is another item in the Briquette Making Machine Components that needs to be fabricated. But it's easy enough to make with a hacksaw and a power drill. The mold is made of a standard 2-inch PVC pipe. You don't need the entire length of a pipe so it's very cost effective if you can find a scrap length, maybe from nearby construction sites. That way you can even source it for free.

The mold is the component that will form and shape the briquettes. In the briquette making process, you will be able to finish more briquettes if you have several of these molds.

Sunday, March 21, 2010

Briquette Making - Clamp and Stand

These two items from the list of the briquette making components essentially form the "machine" that will allow the briquetting compression to happen. The rest of the components are merely accessories that will facilitate the briquette-making process.

Although the clamp is easily available in most hardware stores, the clamp stand needs to be fabricated (more on this later) and customized for the clamp. Shown below is the clamp mounted on the stand.

Saturday, March 20, 2010

Briquette Making - Pail and Tray

Since you will be mixing various biomass ingredients for briquette making, big plastic pails or vats are suitable containers for this purpose. The wide mouth of these containers will make it easier for you to mix the ingredients and transform them into a slurry.

Plastic Pail

For the actual making of the briquettes though, you may want to use a smaller pail with a handle. Using a smaller pail will allow you to move it around for getting the briquette ingredients. It will also be convenient enough to raise it on the sink counter. The briquette ingredients are easier to reach and get from inside a small pail (shown yellow, below) when filling up the mold.

Thursday, March 18, 2010

Briquette Making Machine Components

In a recent entry, I wrote about the workplace where I make my homemade briquettes. Biomass briquettes can come from various ingredients and so the entire process may be a bit messy. Use an apron to keep dry.

In the absence of an affordable commercial machine for home use, you could easily fabricate the various parts that will up the briquetting machine. Shown below are the parts of the homemade briquette making machine. The parts are numerically labeled and briefly explained.